PDA

View Full Version : Just been watching a Fusion 360 video you guys may like



suesi34e
08-07-2016, 10:41 PM
Hi Guys,

Watching this video is interesting around 11min in is an issue. Just watching to try and learn what I can about the software.


https://www.youtube.com/watch?v=IMpzJUeMspA

Hope someone likes it

Steve

Ger21
10-07-2016, 02:45 PM
The Mach3 post processor only supports mist and flood coolant.
Here's how to add other types to the post:
http://forums.autodesk.com/t5/post-processors/post-processor-coolant-here-is-how-to-support-additional-coolant/td-p/6075289

Lee Roberts
10-07-2016, 06:31 PM
Thanks for the share Steve, i'm using 360 myself to.

Dont know if you've seen the NYC CNC (https://www.youtube.com/nyccnc) youtube channel, he dose a series of videos called Fusion Friday, its a new tutorial video served up every friday: Fusion Friday: Fusion 360 CAD/CAM Tutorials! (https://www.youtube.com/playlist?list=PL9tn9rGywKUUGyeBWX5Alt9yzBIp84sD8)

He works mostly with 360 in his job shop now so has other video's all the time that contain 360 as well, worth the subscribe I think.

As a side note, I've also just added a Fusion 360 forum to the CAD/CAM (http://www.mycncuk.com/forums/315-Fusion-360) section, don't know why i didn't do this sooner as we have quite a few using it now and i've been using it for awhile, will have a look and move any 360 discussions there shortly.

.Me

suesi34e
10-07-2016, 10:11 PM
Thanks Gerry what you said may be handy to know when I get going.

Many thanks

Steve

suesi34e
10-07-2016, 10:13 PM
Thanks Lee for heads up. I like NYC CNC I have a watch when I can.
I will keep an eye out for more Fushion posts.
Steve