samsagaz
17-07-2016, 12:12 AM
Hey guys, looks like i finished my new design, Hope someone can tell me whats is wrong.
The total machine size will be like 1400x1400mm and travel X/Y close to 1000x1000mm
Will be using 150x150mm steel tubing and will use screws (just need to weld in one place (where the X Ballscrew move the Y Gantry.
This machine will be used for woodworking. I already ordered hiwin rails for aluminium machine but the woodworking one will be the first that will build.
18884188851888618887
Image #4 display the unique two pieces that will welded together.
Any tip will be appreciated.
My metal working machine will be similar but will use 200x200mm instead 150x150mm in the Y Axis.
Tubing are close to 10mm and plates are 12,7mm!
The total machine size will be like 1400x1400mm and travel X/Y close to 1000x1000mm
Will be using 150x150mm steel tubing and will use screws (just need to weld in one place (where the X Ballscrew move the Y Gantry.
This machine will be used for woodworking. I already ordered hiwin rails for aluminium machine but the woodworking one will be the first that will build.
18884188851888618887
Image #4 display the unique two pieces that will welded together.
Any tip will be appreciated.
My metal working machine will be similar but will use 200x200mm instead 150x150mm in the Y Axis.
Tubing are close to 10mm and plates are 12,7mm!