PDA

View Full Version : FOR SALE: Boxford 260 VMC boards on offer



matoxx
28-07-2016, 08:39 PM
Hi I have converted Boxford 260 and I have 3 boards surplus to requirement:

- main controll board (picture attached)
- Z axis board (no picture as yet)
- Tool carusel stepper driver board (picture attached)

These are on offer for anyone who wants them (to keep their 260 VMC running with original SW) for FREE (if collected). I can post for small fee (to cover postage).

The machine was working (in manual) when I converted it, so I believe these are working (but no guarantie).

I hope these will be usefull to someone.

Martin

sgold
09-09-2016, 01:01 PM
Hi Martin,
I'm restoring a Boxford 260VMC and would be interested in your boards if they are still available. I'm located in Devon - not sure where you are.
Regards
Stuart

matoxx
10-09-2016, 10:14 PM
Hi Stuart,

I'm sorry, after month of no interrest, I had 2 request within one day.
I have already promissed the boards to the other person.

But if I can help in any way just let me know.

Martin

sgold
13-09-2016, 01:44 PM
Hi Martin,
Shame that I was too late. My machines are working but a few spares seems like a good idea, I'll just keep looking.
Regards,
Stuart

matoxx
13-09-2016, 08:39 PM
Hi Stuart,
sorry for that. Keep searching for them, something may come up. most people do upgrade these machines to new electronics.
I would not worry too much as it was working fine for 25+ year - quite reliable and also because of the age, repairable for electronicaly minded person. capacitors are most likely to go. If you find the problem, these are easy to fix.

If you need any help or advice feel free to contact me.

Martin