PDA

View Full Version : Where to buy 2.2Kw Water cooled spindle + VFD



RocketBoy
31-07-2016, 08:59 PM
Evening Gents,

Looking for some advice for where/who to buy a 2.2Kw water cooled spindle from. This is to be mounted to a Routout Z90 XL, the Kress is a nice module but far too loud!

Looking on eBay there seems to be a number of units with slight variations:- 4 bearings etc. I'm looking for the ER20 sized collet version. Can anyone recommend a reliable source??

Many thanks

Mike

nirmal
31-07-2016, 10:00 PM
I bought one from this ebay vendor a couple of weeks back http://www.ebay.co.uk/sch/Other-Automation-Equipment/36802/m.html?item=201604282143&ssPageName=STRK%3AMEBIDX%3AIT&_ssn=beautydirectmall

The item arrived in less than a week. It cost £115. It was well packed and I was pleasantly surprised to find a few collets included in the package. It all looks well made but I haven't turned it on yet so I still don't know if it works as it should. I got a follow up email from the vendor yesterday asking if I had received the item in good order and if there were any issues to contact them first before voicing grievances.

Clive S
01-08-2016, 07:43 AM
Looking for some advice for where/who to buy a 2.2Kw water cooled spindle from. This is to be mounted to a Routout Z90 XL, the Kress is a nice module but far too loud!Unless you have one you will also need a VFD to power and control it so it is probably better to buy them together. These things tend to be shipped out of Portsmouth I don't think there is much to choose from.

Or Germany http://www.ebay.co.uk/itm/2-2KW-CNC-SPINDLE-MOTOR-ER20-2-2KW-220V-VFD-INVERTER-DRIVE-WATER-COOLED-/252025941620

Paul3112
01-08-2016, 12:38 PM
Sen an email to Fred
http://www.aliexpress.com/store/product/Water-Cooled-2-2kw-Spindle-Motor-with-ER20-for-CNC-Engraving-Grinding-Milling-and-matched-2/314742_532289759.html

Paul