PDA

View Full Version : Kompas 2000 machines...any feedback



PWD
18-08-2016, 09:17 AM
I am looking for a gantry machine to cut 6mm plastic sheet and 18mm MDF quite simple shapes and a few holes. I have spied on e bay a firm in the EU but cant really find much out about them..price seems good but anyone heard anything about the company Cau cau

http://www.ebay.co.uk/itm/191943410718?_trksid=p2060353.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT

Clive S
18-08-2016, 11:56 AM
heard anything about the company


Be careful and read the specs as this says;-

All linear axes are connected directly to the trapezoidal screw with the right
Coupled motors and provide a feedback-free driving.

but lower down :=
Our milling and engraving with high precision
Ballscrew offer high precision and accuracy.

and spindle
HF Spindle 1500 W / 24000rpm then in delivery section
Spindle CauCau 850 W
To cut MDF you really need a cutting speed of about 4-5 Mtr/min minimum they are saying the max speed is 1.2Mtr/min

PWD
18-08-2016, 12:32 PM
Hi Clive I have asked them to clarifie just waiting on an answer (think something is lost in translation...I was looking at it with the 1.5kw spindle fitted as that's what a HF is supposed to have..think they have copied and pasted the advert from others. The size and price hits the mark and delivery is a bonus...but I know little about them otherwise tBH