mgg1010
21-08-2016, 10:35 PM
Hi
I have a Heiz T-400 CNC machine in working order and with extras. It cost £3600 ex VAT two years ago - below
is the full summar of the equipment ordered. It was purchased from a UK reseller - I have the receipts.
If you're interested, please send me an offer :)
Thanks
Martin
Product Code
Product Title
Unit Price
Qty
Line Amount
HZT400
Heiz T-400 CNC Machine (with 5-Channel Controller)
Power Lead with UK Plug: Yes
Anti Vibration Rubber Feet: Yes
Vinyl/Foil Cutter: Yes
ConstruCAM Sotware: Yes
Controller Software: WinPC-NC USB - required to support Vectric software and G-Code. USB interfacing (+£320)
Kress Spindle: Kress 1050w (+£145)
Vectric CAD/CAM Software: Not Required
Kress Collet Set: Yes (+£75 save £25)
10-piece Milling Tool Set: Yes (+£80 save £20)
Vacuum Extraction Attachment: Yes (+£60 save £20)
Tool Length Sensor: Yes (+£125 save £50)
T-Groove Plates: Yes (+£85 save £15)
£3,340.00
1
£3,340.00
HZDepth
Engraving Milling Depth Control
£225.00
1
£225.00
vice1
Low Profile Table Vice (Small)
£75.00
1
£75.00
HZ1010
Steel Pinch Clamp with 7mm Diameter Slot
£6.00
4
£24.00
I have a Heiz T-400 CNC machine in working order and with extras. It cost £3600 ex VAT two years ago - below
is the full summar of the equipment ordered. It was purchased from a UK reseller - I have the receipts.
If you're interested, please send me an offer :)
Thanks
Martin
Product Code
Product Title
Unit Price
Qty
Line Amount
HZT400
Heiz T-400 CNC Machine (with 5-Channel Controller)
Power Lead with UK Plug: Yes
Anti Vibration Rubber Feet: Yes
Vinyl/Foil Cutter: Yes
ConstruCAM Sotware: Yes
Controller Software: WinPC-NC USB - required to support Vectric software and G-Code. USB interfacing (+£320)
Kress Spindle: Kress 1050w (+£145)
Vectric CAD/CAM Software: Not Required
Kress Collet Set: Yes (+£75 save £25)
10-piece Milling Tool Set: Yes (+£80 save £20)
Vacuum Extraction Attachment: Yes (+£60 save £20)
Tool Length Sensor: Yes (+£125 save £50)
T-Groove Plates: Yes (+£85 save £15)
£3,340.00
1
£3,340.00
HZDepth
Engraving Milling Depth Control
£225.00
1
£225.00
vice1
Low Profile Table Vice (Small)
£75.00
1
£75.00
HZ1010
Steel Pinch Clamp with 7mm Diameter Slot
£6.00
4
£24.00