View Full Version : Truck axel

05-09-2016, 05:03 PM
Hi do not know if it's the right place buthttp://uploads.tapatalk-cdn.com/20160905/564b534789eaa2be97a834c043b66732.jpghttp://uploads.tapatalk-cdn.com/20160905/0e9b24ca7539415348bb043a47b96d4c.jpg I had fun shrink a trailer axle which had been off the roadhttp://uploads.tapatalk-cdn.com/20160905/848ce1a4a1acd36275cf9516cce15796.jpghttp://uploads.tapatalk-cdn.com/20160905/876c1544e69b930da8db8e4b5205998f.jpghttp://uploads.tapatalk-cdn.com/20160905/8bbbd446bd8e9cb7ea56b20a77121310.jpghttp://uploads.tapatalk-cdn.com/20160905/fee4b69399c820cb0925e3132c03ac7f.jpghttp://uploads.tapatalk-cdn.com/20160905/e5a72d167e0d5f642b733d9c4da68af4.jpghttp://uploads.tapatalk-cdn.com/20160905/48dd73697905bf0685a2258aaf354b50.jpg

Skickas från min iPad via Tapatalk

07-09-2016, 10:28 PM
How much bend was there to start with? Did it straighten out completely?

08-09-2016, 04:47 AM
It was bent like a banana z axis of about 45 mm and the Y axis of about 30mm. Now is it about 2.7 in the z and y 3.3 on the end of the spindle
I have mount the axel and there are adjustments to the spring legs or whatever it's called in English. So I hope it will be enough I measure it in the old way with plum. for I have not laser measuring They will take it to a repair shop and enter the correct

Skickas från min iPad via Tapatalk