PDA

View Full Version : NEW MEMBER: Hi To all



AigarsK
08-09-2016, 09:49 PM
Hi There,

My name is Aigars.

I am computer bloke by speciality and have interest in CNC. Currently own a Stepcraft 2 600 CNC which has forced me to upscale to larger one due to its lack of anti-backlash. But non the less has provided me a lot of insight in working with CNC. Currently have already built a frame from extrusions and have learned that suppliers are bastards thinking that + or - a millimetre is a good enough service when it comes to cutting things.

I am originally from Latvia's countryside, so I know way round things when it comes to all sorts of tools and DIY jobs, but now for past 7 years I'm living and working in London.

Love precision and struggle of my live to achieve it, a CNC is a corner stone of it :)

Looking forward diving into this forum.

AigarsK
09-09-2016, 03:02 PM
Not that this post finally has appeared I can fire away:

I wonder is there a someone from South Woodford are in East London. I need help with machining some aluminum parts which I cannot produce with my Stepcraft as instead of nice circles I get ovals all the time :D

mekanik
10-09-2016, 11:01 AM
Hi AigarsK
Welcome to the forum
If you place a request in
FREELANCE JOBS AND REQUESTS
someone may be able to help with your machining.
If you are on with a new build it would be helpful if you could offer up your design for the lads to have a look @.
They might spot something you have overlooked and put you on the right track.
Under no circumstances purchase any electrical kit until your design has been finalized.
Enjoy the forum
Regards
Mike

AigarsK
11-09-2016, 10:37 AM
Hi mekanik,

Thanks for the advice.

Will share my design of the the planned machine, but currently they are just some sketches with pencil on paper and I mean bad sketches :D

Aigars.

AigarsK
12-09-2016, 08:23 PM
Hey guys,

Sorry if it looks like I am trying to hijack the attention here, but I have created a post for needed CNC work, link below. If anyone would like to have a go at it, please get in touch with me.

Thanks

Link to Post (http://www.mycncuk.com/threads/10177-Parts-need-machining)

G-Bru
18-09-2016, 11:38 AM
Hi Aigars

Do you require these parts as a matter of urgency? I have a day job so only time I could machine these plates you require is on the weekends. I live in Farnborough, so not to far from London. Feel free to contact me on mailmakeapart@gmail.com to discuss this in more detail.

Regards

Grant


Sent from my iPhone using Tapatalk

AigarsK
18-09-2016, 11:26 PM
Hi Grant,

I have sent you an email.

All best,
Aigars.


Hi Aigars

Do you require these parts as a matter of urgency? I have a day job so only time I could machine these plates you require is on the weekends. I live in Farnborough, so not to far from London. Feel free to contact me on mailmakeapart@gmail.com to discuss this in more detail.

Regards

Grant


Sent from my iPhone using Tapatalk