PDA

View Full Version : FOR SALE: For sale - 1605 ball screws & nuts. new unused



Stressedwoodman
18-09-2016, 07:09 PM
I did not follow the advise to plan before buying!!! I have a set of ball screws & nuts 1605's. 300mm, 1000mm & 1300mm long. I bought these off aliexpress, when on offer. With how things have panned out they are surplus to requirements, still in the packaging, I only opened them to check they were as they should be.

i am after 80 for them shipped to your door. I paid slightly more but got stung for customs as well.

i also have a number of other bits, off a machine I am refurbishing, with guidance from Dean. I am basically replacing the controllers and motor drivers, I have 3 gecko G201x drivers and some cnc4you controllers if anyone's interested to.

dandy
19-09-2016, 11:30 PM
hi there,

now dont get me wrong but i will be looking for some ballscrews but...

i am new to all this

so.........

whats the overall pitch length on the screws, ie the travel and also the nut dimensions

im so new i dont yet understand why a lot of them are machined at one end............


thanks in advance

Clive S
20-09-2016, 12:08 AM
whats the overall pitch length on the screws, ie the travel and also the nut dimensions I think the answer was here
I have a set of ball screws & nuts 1605's. 300mm, 1000mm & 1300mm

It means the screws are 16mm with 5mm pitch with the lengths as stated. When they say machined at one end it means that they have been machine to accept the bearing (usually an AC type bearing) and the bit to put the drive pulley or coupling on.The other end of the screw is generally machined to accept a standard bearing .

petesurrey
29-09-2016, 11:24 AM
im after cheap controller from cnc4you if you still have them

Lee Roberts
29-09-2016, 02:11 PM
Woodman, are the screws pre-machined ?

.Me

Stressedwoodman
29-09-2016, 07:19 PM
1937119372Yes I still have the boards, see pics attached. Price say - 50% of price new including postage, so 16 for the cnc4you one, and 5 for the mach3 interface board. PM me details if interested.

The ballscrews are machined for fixed free configuration, ie for bk12 and bf12.