PDA

View Full Version : WANTED: Needing a 1.0MM Leadscrew and Chaser for a Hardinge HCT



Thumper650
08-10-2016, 05:34 AM
Hoping someone in England might have these. Have a job needing this thread,just not available in the states.

Paul3112
09-10-2016, 01:57 AM
I can not directly help, but
http://manuals.chudov.com/Hardinge/
Failing being able to get an original replacement,
I would also speak To Fred Lee @ https://www.aliexpress.com/store/314742.. he makes Ball screws etc. Nice chap to work with and you never know your luck.

Paul

Thumper650
09-10-2016, 06:51 AM
The title is a little miss leading. The leadscrew is actually a cylinder with threads on it. It rides on the spindle input side. Right in front of the collet release lever. The chaser is mounted on a arm that comes down and contacts the leadscrew. I just won this auction. It has blank leadscrews so I can make my leadscrew. But I do need the brass chaser. Steve19400

mekanik
09-10-2016, 10:18 AM
Hi Paul
Have a look here
https://www.reliance.co.uk/en/Leadscrews-Information
Regards
Mike