PDA

View Full Version : FOR SALE: Mill / Router For Sale...



Davek0974
26-10-2016, 04:50 PM
Cut area - 400mm x 300mm
Z axis clearance - 100mm +
X & Y axes speed - 5000mm/min
Z axis speed - 2500mm/min

Heavy Aluminium build
Cast iron machine bed with replaceable 15mm aluminium working bed
HiWin 20 Linear rails
HiWin Carriages with extra chip-wipers and seals fitted
1610 rolled ball-screws on X & Y axes
1605 rolled ball-screw on Z axis
4Nm Nema23 stepper motors, belt drive at 1:1 ratio
DSP Digital stepper drivers
CP0-10v Breakout board
UC100 USB controller
48v Motor PSU
24v Control PSU
2.2kw Water-cooled spindle with ER20 collet chuck
ER20 Collet spanners and a couple of collets
Schneider-Altivar sensorless-vector VFD with speed control via Mach3 of 8,000 to 24,000rpm

Home-made mist lubricator/air blast

All documents from build and some pictures.

Dell PC included - set up and tested ready to go.
Will need a license for Mach3 - not included.
Uses custom "2010" Mach screen-set.

194951949619497

Has been used for a couple of months - now replaced with a far bigger Bridgeport vertical milling machine.

Offers around 2900 buyer must collect from Bishops Stortford, Hertfordshire.

Stand is included.

VERY heavy !!

Davek0974
27-12-2016, 12:59 PM
Still for sale :)