PDA

View Full Version : Carbide burrs & small shank indexable turning tools.



APT
08-11-2016, 02:58 PM
We now have in stock a good range of Rotary Carbide Burrs (https://www.shop-apt.co.uk/carbide-burrs.html) at reasonable prices and we have some good feedback on quality.

We also have a small range of small shank tools from 6mm for CCMT 0602 inserts, Parting blade holders to hold 19mm high blades for 2mm inserts these are compatible with some of the other suppliers i.e GTN (Iscar clones), AP200 (APT), SP200 (Korloy) style inserts and some others. Grooving tools from 6mm these use the 2mm MGMN inserts compatible with the older Korloy system. We also supply the inserts for these tools.

These items can be found from the following links.

6mm & 8mm SCLCR turning tools. (https://www.shop-apt.co.uk/apt-95-sclcrl-lathe-turning-tools-for-ccmt-inserts.html)
6mm, 8mm, 10mm & 12mm Parting tool holders, 19mm high blades (https://www.shop-apt.co.uk/part-off-blades-blocks-sgih-sgtbn-gtn-style.html).
6mm, 8mm & 10mm grooving tools for MGMN inserts. (https://www.shop-apt.co.uk/external-grooving-tools-for-mgmn-inserts.html)

Regards,

Shop-apt.co.uk