PDA

View Full Version : FOR SALE: Mesa 5i25 and 7i76



m_c
11-01-2017, 09:40 PM
I bought these with the intent of trying out PathPilot, however I've just not had the time to do that, and I've decided to have a cull of projects along with a clear out, so these are first to go

Mesa 5i25 and 7i76 boards, plus the connecting cable. I bought them via here for 150, so I think it's only fair I resell them for the same price, even though the exchange rate has changed quite a bit since I bought them.
They are still in the original packaging I received them in, and the only thing I've done, is open the box, have a look and put them back. I don't think they've even been out the original antistatic bags.

Clive S
11-01-2017, 10:08 PM
is the 5i25 pc or pcx edit I think the 6i25 is the pcix

Bluenova
13-01-2017, 12:58 AM
Hi MC - if you still have the Mesa boards, I'll buy them.
I'm new to the forum, so have not found out how to PM yet.

NB70
13-01-2017, 10:14 AM
I would be interested

Clive S
13-01-2017, 11:32 AM
I would be interested

These two boards will make a very good motion control setup if you are into Linuxcnc with plenty of inputs and outputs including encoder. I have this combo myself.

NB70
13-01-2017, 11:43 AM
Thanks Clive, that's what I'm planning - I'm using Linuxcnc at the moment via the parallel port, but my current PC is getting unreliable & needs to be retired - its difficult to find PCs with good enough latency for software stepping through the parallel port.
Nathan

Clive S
13-01-2017, 11:51 AM
Thanks Clive, that's what I'm planning - I'm using Linuxcnc at the moment via the parallel port, but my current PC is getting unreliable & needs to be retired - its difficult to find PCs with good enough latency for software stepping through the parallel port.
Nathan

That,s the beauty using the 5i25 (it needs a pci slot) the latency is not so much of an issue as the step generation is done on the card.

Ross77
14-01-2017, 10:40 AM
If they are still for sale I would be interested.
cheers

m_c
14-01-2017, 12:47 PM
Boards are now sold.