Kress 1050 FME-1 Parts

[CrazeUK]

Hey guys,
I bought a Used CNC with a Kress 1050 FME-1 ROuter / Spindle.
Unfortunately i forgot to check all the bits where there.

It turns out the:
1. Nut
2. Collet
3. Lock power cord

Are all missing, Does anyone know where i can get some from or purchase alternatives, i have noticed the official ones are VERY expensive.

£45 for a cable
£25 for the nut
£15 for the collet.

Thanks in advance

[Tom J]

I use them
http://cnc-plus.de/en/Collets---Clamping-Nuts/?XTCsid=4d50102f4d83fac870325d0e94428a23

[the great waldo]

Hey guys,
I bought a Used CNC with a Kress 1050 FME-1 ROuter / Spindle.
Unfortunately i forgot to check all the bits where there.

It turns out the:
1. Nut
2. Collet
3. Lock power cord

Are all missing, Does anyone know where i can get some from or purchase alternatives, i have noticed the official ones are VERY expensive.

£45 for a cable
£25 for the nut
£15 for the collet.

Thanks in advance

Hi Craze

This chaps got all you need

http://www.bk-faserverbundtechnik.at/shop/index.php?cPath=13_51
http://www.bk-faserverbundtechnik.at/shop/show_product.php?cPath=13_51&products_id=144
http://www.bk-faserverbundtechnik.at/shop/show_product.php?cPath=13_52&products_id=285
http://www.bk-faserverbundtechnik.at/shop/show_product.php?cPath=13_51&products_id=141
http://www.bk-faserverbundtechnik.at/shop/show_product.php?cPath=13_51&products_id=150

the chap that runs the firm is very nice and prices are reasonable.
Cheers

Andrew

[A_Camera]

Multiple thread...

Here are some answers as well:

http://www.mycncuk.com/threads/10597-Kress-1050-FME-1-Parts

[CrazeUK]

Multiple thread...

Here are some answers as well:

http://www.mycncuk.com/threads/10597-Kress-1050-FME-1-Parts
Hey. Thanks. Ya. I put one in a normal discussion thread, guess more to find out if there was alternatives, then realised I should have put a wanted ad too.

Sent from my SM-N930F using Tapatalk

[CrazeUK]

Hey All.
Just an update. I now have a 6mm collet, a nut, and the cable. All that i need for the moment while i play.

I definitely plan on switching to a spindle sooner rather than later.

Thanks for everyones help :D