Roy's DIYCNC System 3 board

[John S]

Got a machine in for repair and it's fitted with one of Roy's System 3 board so looking for the PDF booklet on it if anyone has one.

Can't ask Roy as he's retired to Spain and sold out to R-Tech, the welding people but they have discontinued all the CNC parts.

[John S]

Now sorted, many thanks.

[john swift]

Hi John
I have just had a look here -
https://web-beta.archive.org/web/*/http://www.diycnc.co.uk:80/*

see next to bottom file

found the system3 manual and a photo

for some reason I cant upload the manual !!!
I'l try and save the pages as jpegs
21231


John

21232212332123421235212362123721238212392124021241 2124221243

[John S]

John,
Thanks for that but after doing a bit of searching earlier on the same site I determined it was a System 4 but with only three cards fitted.
I now have about 5 copies of the various iterations of that System4 book.

Many thanks anyway.

Will have some more question is a fresh thread as this machine a Boxford 160 has a toolchanger fitted and it's been roughly converted to Mach3 [ one axis moves ] but it's lacking the tool changer macro.

However I need to do some homework for myself first and then if still stuck, start a new thead.

[john swift]

Hi John

good to see you have found the information you needed

I've found the internet archive wayback machine use full several times when web sites I've searched for have closed

my reply still use full if it brings the archive to the attention other members here

John

[john swift]

Hi John

spindle 2 & pcpps circuits to add to your CRH Design archive

21247

21248

John