PDA

View Full Version : Unimat 3 Lathe CNC Converted



adrpak
05-04-2017, 02:38 PM
Unimat 3 Lathe Manual/CNC Converted.
Very good condition.
Very reach tools equipment.

https://uploads.tapatalk-cdn.com/20170405/0c0f0df97c64d9688c8d9f9a540a3b16.jpghttps://uploads.tapatalk-cdn.com/20170405/c5187e9ef197ac21a14f848ff53318cc.jpghttps://uploads.tapatalk-cdn.com/20170405/4a84c0e700be03400bbf08feb02c2963.jpghttps://uploads.tapatalk-cdn.com/20170405/1eb6b9882086d6d0f4a725f6aad4105d.jpghttps://uploads.tapatalk-cdn.com/20170405/89e70bc144dd8eb6f30cead7a93c6c36.jpghttps://uploads.tapatalk-cdn.com/20170405/af83786857807106dbdd3c5a7b7e5dc9.jpghttps://uploads.tapatalk-cdn.com/20170405/881615c062822d5cd3f61f0121c1cd22.jpghttps://uploads.tapatalk-cdn.com/20170405/13f87bf082110391ac94801b4a8a55b4.jpghttps://uploads.tapatalk-cdn.com/20170405/78f333254af1c9349010d4374f758622.jpghttps://uploads.tapatalk-cdn.com/20170405/114d0de33191c628dbc5192318611820.jpg

Wysłane z mojego SM-G935F przy użyciu Tapatalka

adrpak
05-04-2017, 02:43 PM
Hardware:
Nema 17 1A motors.
2A drivers. Cnc board: Arduino Uno + Cnc Shirld 3.0.
Software:
Universal Gcode Sender Platform
Cambam 0.98https://uploads.tapatalk-cdn.com/20170405/04f2859a7b5c318ba5a972c377545f9a.jpghttps://uploads.tapatalk-cdn.com/20170405/3b605b103f4eb362e348786b12b7c049.jpghttps://uploads.tapatalk-cdn.com/20170405/86243d7a13b050d69c8032bb63ff8643.jpg

Wysłane z mojego SM-G935F przy użyciu Tapatalka

scooterist007
12-04-2017, 11:17 AM
How much and where are you?


Sent from my iPad using Tapatalk

adrpak
12-04-2017, 11:50 AM
How much and where are you?


Sent from my iPad using Tapatalk

Lancashire / Darwen

350 without conversion.

+70 with conversion.

Cnc conversion is just experimental. No end stops, No homing.

Lathe in action:
https://www.youtube.com/watch?v=rTkYJe1UMoc

terry1956
12-04-2017, 01:41 PM
If you are open to offer I would be interested. Pm me. Michael

Chaz
21-04-2017, 08:02 AM
What is the working area size for this machine? Looks tiny but from the vids it actually looks reasonable.

adrpak
21-04-2017, 08:08 AM
Its about 180mm between chuck and tailstock.

Wysłane z mojego SM-G935F przy użyciu Tapatalka

Chaz
21-04-2017, 08:14 AM
And max diameter?

Cantbedone
11-06-2017, 03:01 AM
Is this machine still up for sale if so can you please contact me. ASAP Thanks

Lars
02-05-2018, 04:54 PM
Is the system sold

if not
what exactly is included or better what do I need myself to have this system running (PC, license for software driver , etc) if I bye 350+70

Can You send it to Sweden ?

Best Regards
Lars