PDA

View Full Version : NEW MEMBER: Hi from Switzerland



bigtwinch
18-04-2017, 02:02 PM
Good Morning All,

My name is Christian and I am early-retired men:cool:.

My hobbies are DIY CNC Router and Aircraft Copters. My equipment in the workshop is a
Lathe OPTIturn 320mm x 920mm a OPTImill MF 2Vario, Bandsaw etc.
I made a CNC Router x301, Y490, Z108 with Nema23 Steppers and a CSMIO/IP-S controller, Mach3 with Gerry's Screen
etc. My profession is electrician so I have to learn alot regarding metallworking. You know my mother tongue is german so please ignore the typographical errors and grammar.
Best Regards,
Christian

Greeny
19-04-2017, 01:02 AM
Good Morning All,

My name is Christian and I am early-retired men:cool:.


Hi Christian,
Early retirement sounds pretty good :chuncky:
Do you have any pictures or videos of your previous machine?

Cheers

bigtwinch
20-04-2017, 04:47 PM
Hi Christian,
Early retirement sounds pretty good :chuncky:
Do you have any pictures or videos of your previous machine?

Cheers

Hi Greeny

As you requested some pictures
21435214362143721438214392144021441214422144321444

Cheers

Greeny
20-04-2017, 05:15 PM
Hi,

That looks like a really nice machine.
Solid, sturdy & very well put together.
Nice job :-)

Cheers

Ger21
21-04-2017, 02:52 PM
Excellent work on the control cabinet.

Does your Huanyang VFD actually contain the circuitry for that braking resistor?
Mine doesn't, and I was under the impression that none of them did. They all have the terminals for the braking resistor, but they don't connect to anything.