PDA

View Full Version : Problems with my CNC using Mach3 with a Sunfar E300 Inverter



Malcolm
19-04-2017, 12:27 PM
My CNC has been working very well, and suddenly stopped. Initially I thought the cause was a loose connection with the USB. I solved that, but now I cannot get the Router to work. Everything else is 100%OK. X,Y & Z all perform as required, however the actual Router is not spinning. Mach3 also indicates the expected router speed.but then nothing !!

I live in the Bristol area, and am seeking a "Hobby" Engineer, who I could seek support from. Does anyone have any suggestions to help me.

In anticipation .... thank you

Clive S
19-04-2017, 01:35 PM
Hi Malcolm and welcome to the forum.
It would help if you supplied some more details and some pics of the machine is the router (spindle) connected via a VFD etc

Malcolm
19-04-2017, 04:25 PM
Clive, My problem is my age (80) and not clever with anything electrical !!. I will collect all the info I have, and post in the next 24 hours.
MANY THANKS
Malcolm

Malcolm
20-04-2017, 01:31 PM
Clive, My problem is my age (80) and not clever with anything electrical !!. I will collect all the info I have, and post in the next 24 hours.
MANY THANKS
Malcolm

Malcolm
20-04-2017, 01:46 PM
Clive, as promised here are 2 photos of my machine a GX 6060, that Imported from China. In addition I attach photos of all the items installed.

I am not sure what other questions you want answered, but ask, and I will try to answer
Best wishes, Malcolm2142821429214272143021431214322143321434