PDA

View Full Version : Mach3 Turn Screenset



davo453
21-04-2017, 11:28 AM
Forgive me if this has been answered before, but i'll be damned if I can find it in the archive...

I am playing around with Mach3 Turn having just modified my little Hobbymat Lathe.

I wanted to calibrate x & z so as advised somewhere on the net loaded up the mill screen set in Mach3 (R3.043)

It calibrated just fine but now I want to go back to the standard Mach3 Turn screen set and there isn't one or having searched high and low in the mach3 directories I cannot find it.

Any clues on how I get it back to standard/default?

davo453
21-04-2017, 12:19 PM
SOLVED

Typical as soon as I ask a question I solve it myself and it's always obvious if a little hidden.

Turns out that there are different file types so when in Mach3 and trying to load a screen set you can choose "Mill Files *.SET or Turn Files *.lset etc

Easy when you use your eyes and click finger...