PDA

View Full Version : V Groove bit recommendation



etched4u
29-04-2017, 08:58 AM
I am looking for a v groove bit 10mm or 12mm (larger if pssible) x 90 degree v bit for cnc, I have a kress spindle max shank diameter is 8mm, I can find lots with a 1/2 in shank, no luck with 8mm shank, I have had the cheap ones before and finish was poor, so went back to smaller bits, I now need larger bit again.

Any help appreciated

BTW As I am in UK seller in UK would be great, any recomention would be helpful

csessage
06-06-2017, 01:09 PM
Hi,

I'm Snr Tech in a secondary school with two Boxford routers. I order Trend cutters with 1/4" shank from Miles Tools:
https://www.mtmc.co.uk/Routing--Tooling/Router-Cutters__c-p-0-0-105-4927.aspx

Hope that helps,

Carol :)