PDA

View Full Version : Step/Dir vs Pul/Dir



iforeman
02-05-2017, 01:49 PM
Hi

Sorry if this is a stupid question, but I just need to confirm the following please.

The markings/labels on my AM882 stepper driver are: PUL, DIR & ENA

I believe these translate as follows:

PUL = Pulse Signal which = or is the same as Step signal or Stepping pulse, or just STEP
DIR = Direction Signal.
ENA = Enable Signal. This signal is used for enabling/disabling the driver.

Am I correct??

Thanks

Ger21
02-05-2017, 02:16 PM
yes, you are correct.

iforeman
02-05-2017, 02:18 PM
Thanks for the quick reply.

Ian