John S
18-06-2017, 09:37 AM
As the title says this is a professionally made router by Pacer
Early model and the frame etc is made from HDF which is like MDF but far denser. They built them by glueing up all the pieces, then machining them flat before assembling the linear rails.
It was bought as a project, dismantled as its very heavy and brought home and stored. It is complete with NSK linear rails and ground ball screws. I can throw 3 Nema 24, 4nM motors in and 3 API stepper drives.
There are no other electronics other than an orphan pacer board underneath. It is floor standing on its own cabinet and would be an ideal project for someone wanting a very robust workhorse.
Still in a dismantled state for transport but very heavy, will take a two man lift and I can't help as selling this due to health reasons.
£500 firm, no offers, no tyre kickers or Reliant owners.
Located 3 miles from J24 or J25 of the M1. NG10 post code.
John Stevenson.
Contact via Pm or [email protected]
Early model and the frame etc is made from HDF which is like MDF but far denser. They built them by glueing up all the pieces, then machining them flat before assembling the linear rails.
It was bought as a project, dismantled as its very heavy and brought home and stored. It is complete with NSK linear rails and ground ball screws. I can throw 3 Nema 24, 4nM motors in and 3 API stepper drives.
There are no other electronics other than an orphan pacer board underneath. It is floor standing on its own cabinet and would be an ideal project for someone wanting a very robust workhorse.
Still in a dismantled state for transport but very heavy, will take a two man lift and I can't help as selling this due to health reasons.
£500 firm, no offers, no tyre kickers or Reliant owners.
Located 3 miles from J24 or J25 of the M1. NG10 post code.
John Stevenson.
Contact via Pm or [email protected]