Small CNC Lathe

[Ba55foreva]

Good morning,
I am in search of a decent CNC lathe. something along the lines of the emco compact 5. Must be single phase. I have cash waiting for the right machine and able to collect within 10 days. the machine must be a runner as i need to put into production straight away. but please show me what you have. if its a project then i may be interested for a future project.

Regards,
Elliott Hill

[Chaz]

I have an Emco PC 120 that has been retroffited to Mach 3 that I will likely be selling soon. Would this suit?

[Ba55foreva]

Hello. Yes very interested. How soon?. Location?. And ball park figure?

Regards
Elliott

[Chaz]

Hello. Yes very interested. How soon?. Location?. And ball park figure?

Regards
Elliott

Hi, give me a number and Ill call you. Numerous options for timing etc. Am based in Uxbridge / Ickenham - UB108TE, West London. The machine was delivered to me by Landy Man, estimated weight is around 600 kgs, so fairly moveable. Its currently on a set of skids in my garage as I move it around as I need to move stuff.

[Ba55foreva]

Hey. Is it single phase? What's the foot print?

[Chaz]

Yep, it runs off single phase. Ill do some measurements tonight however the spec for them is widely available. From memory, around 2m wide, 1.4m high in about a meter deep but that is just from memory.

[Ba55foreva]

Ok. Let me know a ball park price mate.

Elliott

[Chaz]

I found some specs here:-


https://www.exapro.com/emco-pc-turn-120-cnc-lathe-p30607031/


https://www.truck1.eu/img/Other_machinery_Machine_tool_EMCO_PC_120_turn_lath e_Repair_item-xxl-6248/6248_4940090557365.jpg


ISTANCE between centers 236 mm
Swing over bed 180 mm
Max Dia. Turning 75 mm
Carreras X / Z 55/172 mm
Max. Part length to 121 mm dish
MAIN SPINDLE
20.5 mm spindle bore
Bearing 45 mm dia
MOTOR HOME
Asynchronous AC motor 1.9 kW (2.55 hp)
Speed ​​range 150-4000 rpm
TRUCKS FORWARD
Fast forward to 5 m / min.
COUNTERPOINT
Racing upper 120 mm
Cane diameter 35 mm
ELECTRICAL CONNECTION
Input voltage 400 v 50/60Hz
Switching capacity 2.3 kVA
Up fuse max. 16 A
Dimensions (mm) 2130 x 1400 support bank x 1650 high
Weight (with bench support 550 Kg

[Chaz]

Ok. Let me know a ball park price mate.

Elliott

I'd be looking for around £3k. The 120 is a very good and accurate CNC lathe. European made quality, lots of cutting videos on YouTube showing them working.

It's got full floodcoolant which I've now managed to get working via Mach3.

Only niggle I have is the VFD is tempremental, replacement is just over £100, can take this off the asking price if happy with it like this.

Thanks.

[Chaz]

Actually, I did do a short vid sometime ago when doing a quick test part.


https://www.youtube.com/watch?v=a7rIcS21wD0