PDA

View Full Version : EM806 drivers



phill05
02-07-2017, 07:00 AM
Would anyone know if the RS232 cable needed to connect the driver to use Pro-tuner software, could I connect using a RS232 to USB please.

Phill

Clive S
02-07-2017, 09:14 AM
Would anyone know if the RS232 cable needed to connect the driver to use Pro-tuner software, could I connect using a RS232 to USB please.

Phill

Have you seen this thread as there is some info here :- http://www.mycncuk.com/threads/11007-Leadshine-AM822-drivers-purchased!?p=92492#post92492

I believe you can get a usb to serial adaptor you might have to reverse the tx and rx connections on the lead.

phill05
02-07-2017, 10:05 AM
Thanks Clive,
Had not seen the thread, this is what I can get and would like to connect it to a laptop

22055

Phill

Clive S
02-07-2017, 10:16 AM
Thanks Clive,
Had not seen the thread, this is what I can get and would like to connect it to a laptop

22055

Phill

That looks like a RJ11 to DB9 you would also need something like https://www.amazon.co.uk/USB-RS232-Converter-Cable/dp/B00077DJIQ

or similar make sure you get a driver disc with it

edit you might have to reverse the tx and rx wires as I said in the last post

Ger21
02-07-2017, 01:23 PM
As Clive said, you need both the cable you are showing, and a USB to RS232 adapter to plug it in to.

Lee Roberts
02-07-2017, 04:11 PM
Did'nt really old laptops come with a COM port ?