PDA

View Full Version : NEW MEMBER: johan brink



johan
10-08-2009, 02:27 PM
hi every one
i am a new member
i am building my own 3 axes cnc router cutter
i design it bussy building it, but one problem
the elctronics gets me under
the diagrams and the hardware is not the same
stepper controler pm542, stepper motor m60sth88-3008df, interface card pcpps, power supply ps407 and handy pulser ismm 1468

email :waterelec@telkomsa.net

irving2008
10-08-2009, 05:10 PM
hi every one
i am a new member
i am building my own 3 axes cnc router cutter
i design it bussy building it, but one problem
the elctronics gets me under
the diagrams and the hardware is not the same
stepper controler pm542, stepper motor m60sth88-3008df, interface card pcpps, power supply ps407 and handy pulser ismm 1468

email :waterelec@telkomsa.netWelcome Johan. Can you be a little clearer what the problem is with the electronics? The wiring for most 3 axis drives is usually pretty much the same whatever supplier/product. What usually gets people is the wiring between driver and motor. If you explain your specific problem we should be able to help...

Gary
10-08-2009, 08:07 PM
Johan,
I got your email, and I will email you a wiring schematic tomorrow when i get to the office.

Gary


hi every one
i am a new member
i am building my own 3 axes cnc router cutter
i design it bussy building it, but one problem
the elctronics gets me under
the diagrams and the hardware is not the same
stepper controler pm542, stepper motor m60sth88-3008df, interface card pcpps, power supply ps407 and handy pulser ismm 1468

email :waterelec@telkomsa.net