PDA

View Full Version : New UC300ETH Breakout Board/Motherboard



Ger21
23-07-2017, 03:56 AM
CNC Room in Thailand will soon be releasing a new breakout/ motherboard for the UC300ETH, called the UB1.

Specs will be similar to the excellent MB2 breakout board for the ESS.
24V I/O
2 Analog Inputs
2 Analog Outputs
0-10V Speed Control
3 relays
8 input safety circuit
5V isolated inputs for TTL device as well. The users can hook up low voltage MPG.

The UB1 uses 3 ports of the UC300ETH, and provides headers for ports 4 and 5.

Here's a test video of the first prototype.
https://www.youtube.com/watch?v=xZn_jq5LR8A

CNC Room hopes to be ready to start shipping in about 1 month.

Greeny
23-07-2017, 12:01 PM
Thanks for the heads up.
It's a while since i had a look at their website. It often seems to be down or unresponsive

I was going to get an mb2 for the uc300eth, but I'll be ordering one of these as soon as they're available.

Ger21
23-07-2017, 01:46 PM
It's a while since i had a look at their website. It often seems to be down or unresponsive

I pop in there fairly often, and have never had an issue with their site.

I'll probably be selling my MB2 as soon as I get the UB1.
The MB2 is excellent, and the UB1 should be even better for use with UCCNC.

Greeny
23-07-2017, 07:10 PM
That's weird, been unable to access site all day today.
22249

Ger21
23-07-2017, 07:25 PM
Loads fine here...

Greeny
23-07-2017, 08:59 PM
Ok thanks. Will look into it.

Lee Roberts
23-07-2017, 09:00 PM
Looks like a nice board Gerry, thanks for the heads up about it, I've sub'ed also.

Not sure what BOB i'm going to use on the current machine i'm building but this one looks very promising.

Ger21
23-07-2017, 09:14 PM
Hopefully I'll have one to play with in 5-6 weeks.
He's estimating 3 weeks before he can start selling them. I believe that they'll also require a UCCNC update to support them.

Ger21
10-08-2017, 05:37 PM
The UB-1 is now available for purchase.
http://www.cncroom.com/interface-cards/ub1

They won't be shipping for about a week, though.