PDA

View Full Version : NEW MEMBER: New member from Poland



pinolec
20-08-2017, 10:01 AM
Hi all,

My name is Piotr Trembecki I'm hobby CNC machinist. My CNC adventure started when I needed enclousure for my electronics project. So I bought frame with all the mechanics for CNC mill added my own controls. Then I needed injection machine to make my parts. The machine is working now but I would like to make few changes to it. Thats why I am here. Also to share with you what I've done :smug:

AndyGuid
21-08-2017, 07:22 AM
Welcome to the forum Piotr.

Look forward to seeing what you've done!

Desertboy
21-08-2017, 08:15 AM
Hi all,

My name is Piotr Trembecki I'm hobby CNC machinist. My CNC adventure started when I needed enclousure for my electronics project. So I bought frame with all the mechanics for CNC mill added my own controls. Then I needed injection machine to make my parts. The machine is working now but I would like to make few changes to it. Thats why I am here. Also to share with you what I've done :smug:

Cześć!

Welcome to the forums, where in Poland are you from? spent some time in Poznan was nice.

pinolec
21-08-2017, 10:29 AM
Cześć!

Welcome to the forums, where in Poland are you from? spent some time in Poznan was nice.

Hi, I'm from Stargard. It's about 100 miles north from Poznan. I've spend some time in UK as well. Like 10 years :) Mostly in Feltham, Middlesex and Farnborough.

You can check my plastic injection moulding machine build http://www.mycncuk.com/threads/11230-DIY-injection-moulding-machine-by-pinolec

Desertboy
21-08-2017, 12:09 PM
Hi, I'm from Stargard. It's about 100 miles north from Poznan. I've spend some time in UK as well. Like 10 years :) Mostly in Feltham, Middlesex and Farnborough.

You can check my plastic injection moulding machine build http://www.mycncuk.com/threads/11230-DIY-injection-moulding-machine-by-pinolec

I saw that I have a lot of experience with injection moulding but with 400 ton machines lol interesting to see the other end. I do appreciate just how complex the molds are I've seen inside a lot of molds now and spent a lot of hours on the shop floor of an injection moulders.

Good luck with your molding project.