PDA

View Full Version : NEW MEMBER: Hi everyone!



TERRY CORDER
06-09-2017, 06:55 PM
Hi, I'm the new boy and I just wanted to say hello to you all, so, hello to you all!

since 2014, I've been the proud owner of a, DUAL HEAD LC1390 LASER CUTTER / ENGRAVER. 100w & 60w CO2 TUBES, running LASERCUT 5.3

I'm more than willing to help anyone with a problem with Chinese lasers if I can and to share my experiences.

I would have joined years ago but I've only just discovered this forum.

Desertboy
12-09-2017, 10:23 AM
Hi, I'm the new boy and I just wanted to say hello to you all, so, hello to you all!

since 2014, I've been the proud owner of a, DUAL HEAD LC1390 LASER CUTTER / ENGRAVER. 100w & 60w CO2 TUBES, running LASERCUT 5.3

I'm more than willing to help anyone with a problem with Chinese lasers if I can and to share my experiences.

I would have joined years ago but I've only just discovered this forum.

Hi, welcome to the forums. I have a quick question what thickness Ply can you cut with the 100w tube?

I've got it on the bucket list to build to a laser cutter but they're a lot scarier build than a cnc router lol, especially the lining the mirrors up bit.