PDA

View Full Version : Oldchippy



Oldchippy
22-09-2017, 06:11 PM
Hi all,
I have brought some electrical components from China for my self build Cnc router, a DB25-1205 bob, DQ542MA drivers and 57BYGH115-003 stepper motors, it came as parts but no electrical diagrams or instructions.
The wiring layout off of YouTube shows VCC to Enb+, Pul- and Dir- to Grd. Pul+ to P2 and Dir+ to P3.:sour::sour:
The 36v to the motors and the wiring of the steppers seems straight forward.
But no movement on the motors, am I missing something?
I am running Mach3 and have followed the setup video by Paul Campbell which I think is Artcams training video, still no joy.
The motor gets quite warm/hot if left on, and there are signs of life, viz slight buzzing when turned on.
I am using an old XP which needed a parallel port installed, does this need configuring for key actions?
Really appreciate any input.

Boyan Silyavski
24-09-2017, 01:57 AM
DQ542MA driver nmanual (http://www.openbuilds.com/uploadfiles/Manuals/DQ542MA%20English%20Manual.pdf)


http://www.mycncuk.com/threads/6445-Driver-wiring-advice-needed



https://www.machsupport.com/forum/index.php/topic,6042.0.html


https://www.youtube.com/watch?v=uglCm_qsojk



That should sort you out. And by the way untilyou hit the reset button on Mach3 nothing will happen :joker: