PDA

View Full Version : WANTED: CNC desktop Router wanted



totally useless
01-10-2017, 10:14 PM
CNC Desktop router wanted. I just want to engrave text into mdf boards about 24" x 30" ish
i have a budget of 1500 anyone with anything out there? would prefer a full working set up. :]
thanks

fifa
19-10-2017, 12:22 AM
CNC Desktop router wanted. I just want to engrave text into mdf boards about 24" x 30" ish
i have a budget of 1500 anyone with anything out there? would prefer a full working set up. :]
thanks

Good day

For relatively stiff machine:
1500 is too low for 800 mm x 600 mm.

Mechanic cost more...

totally useless
19-10-2017, 10:44 PM
good day

for relatively stiff machine:
1500 is too low for 800 mm x 600 mm.

Mechanic cost more...

what about 3000?

sbdtasos
20-10-2017, 04:35 PM
i am selling this machine if you are interest

http://www.ebay.co.uk/itm/322835498722?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649

Leadhead
20-10-2017, 05:45 PM
I have a fully configured router about 650 x 420 footprint. Never been used, except to calibrate. Fitted with Smoothstepper and Longs steppers and drivers. Comes complete with laptop, Mach licence and 2010 Screenset. There is the option to have a toolsetter button and a digitising probe if desired. Would like about 750. Located South Hampshire. PM me if of interest.

Stads
04-12-2017, 03:45 PM
Have a MDF built gantry router. Too big for my shed with an older "Camtronics" interface No PC though.
Location is East Devon