PDA

View Full Version : My CNC 300*440 for processing aluminum alloys and hardwoods.



foto-boss
14-10-2017, 10:13 AM
https://youtu.be/O2TR3LelbDo

https://youtu.be/WtDpv4s_ZM8

https://youtu.be/OHRuxtJj5MA

endlasuresh
15-10-2017, 07:38 PM
How much weight it can capable to hold? I am too looking for a moving gantry, and do you offer your design to see?

foto-boss
16-10-2017, 06:02 AM
How much weight it can capable to hold?
In what sense?



I am too looking for a moving gantry, and od you offer your design to see?
In this machine, only the transverse beam, without the portal racks as such.
At the beginning of the third movie, a sketch is shown.

foto-boss
17-10-2017, 02:38 PM
I did not quite understand the question about the maximum weight.
The sketch is shown at the beginning of the third clip.

endlasuresh
17-10-2017, 07:12 PM
Hi Thanks for your reply, I mean How much the weight can handle the base?
Suppose If I want to keep 200 kgs plate to mill, can it will handle? Hope you got my question.
I was thinking to build the base of 5 or 6 mm thickness of square poles.
Ive had some more questions.
1. Do you mean the cutting area would be in 300mm * 400mm?
2. In the video their is no details how you fixed the moving aluminium plate that is on rails.

It looks easy to build the machine, but I will take your help.
I don't know what is your size of Table but my Table was 32*71 Inches table. Ive had some more question but please answer above.

endlasuresh
26-10-2017, 09:46 AM
I am still awaiting your answer, can you mention them? I will design my CNC router soon in Solidworks.

foto-boss
03-11-2017, 02:53 PM
...
1. Do you mean the cutting area would be in 300mm * 400mm?


300*440



...
2. In the video their is no details how you fixed the moving aluminium plate that is on rails.


Fastened with bolts m5. In the new clip seen from the inside.


https://youtu.be/ZVtywv2Wwxw

P.S. I really do not know about the maximum weight.

foto-boss
04-12-2017, 02:29 PM
https://youtu.be/2ml6-x9iwyI

foto-boss
13-01-2018, 03:12 AM
https://youtu.be/IR38_7-bgPg

foto-boss
27-01-2018, 04:13 AM
https://youtu.be/ijRZCyVKhX0

AndyGuid
27-01-2018, 04:23 AM
Thanks foto-boss for the regular supply of interesting video.
Please keep them coming.
Plans and Photos are great but Videos are tops!

Andy

foto-boss
28-01-2018, 03:05 AM
Thank you!


https://youtu.be/veUsdiSz-xM

foto-boss
11-02-2018, 07:05 PM
https://www.youtube.com/watch?v=Xx0z25Cb3hY

Doddy
11-02-2018, 09:14 PM
2:20... what is that magic fluid?

foto-boss
11-02-2018, 09:33 PM
2:20... what is that magic fluid?

Liquid caustic soda - pipe cleaner.

Doddy
11-02-2018, 09:36 PM
Ah, thank you. I thought it was something to stop the aluminium galling on the bit (like a lubricant), but I guess you just used it to clean the aluminium that was welded to the bit.

foto-boss
11-02-2018, 09:46 PM
Yes, I just cleaned it.
It stopped to stick, because it reduced the depth at a time.

foto-boss
18-02-2018, 12:32 AM
https://youtu.be/jZzm0NHtCjE

foto-boss
09-04-2018, 10:30 PM
https://www.youtube.com/watch?v=Rt45MNf_2B8

endlasuresh
06-08-2018, 06:00 AM
Does this is on steel, also what type of rails you used?