andy1989
15-10-2017, 11:46 AM
I'm looking for someone to fabricate and machine a fixed gantry CNC router frame.
The design hasn't been finalized at the moment because I would like some input from the manufacturer about what can and cant be done.
X axis length will be 650mm, Y 850mm, total gantry height 150mm ish.
Motion componants will be hgr20 with ball screws.
Im located close to Manchester, would be willing to travel a little to pick up the finished frame.
Current plan uses 100x100x5mm steel box section. Ideally the gantry would be bolted on to allow easy transport.
The design hasn't been finalized at the moment because I would like some input from the manufacturer about what can and cant be done.
X axis length will be 650mm, Y 850mm, total gantry height 150mm ish.
Motion componants will be hgr20 with ball screws.
Im located close to Manchester, would be willing to travel a little to pick up the finished frame.
Current plan uses 100x100x5mm steel box section. Ideally the gantry would be bolted on to allow easy transport.