PDA

View Full Version : NEW MEMBER: New member



plasma777
18-08-2009, 11:22 PM
I work for a few years as a programmer in motion control.
Here is some freeware I made:

http://www.plasma777.com

One is BMP to DXF (or GCODE) -> tracing softwer god for plasma or lasr

Second is CAM (part maker) good for plasma laser and maybe for router
Export to GCODE is finished but i still work on it

I have plan to build nesting program with export to GCODE, so almost
complete system for plasma cutting

audioandy
19-08-2009, 06:36 AM
Plasma

Welcome to the forum, I'm sure there will be members on here interested your software, thanks for sharing :beer:

Andy

mike techserv
26-08-2009, 10:46 PM
Hi Plasma777
I have been messing around writing nesting software, I have the dxf to gcode sorted and have a simple bump nesting routine running, gets a bit too slow when I have more than 10 shapes on the go, but early days yet. Dumped a screenshot in the gallery. It is used with a touch screen so has big buttons.
Mike

John S
26-08-2009, 10:51 PM
Mike,
Did you know that Vectric now has nesting in VCarve V5.0 and Aspire ?

there are some video's on the Vectric home page.

mike techserv
26-08-2009, 11:04 PM
looks to be clever stuff, I'm glad I only have to worry about 2D . I thought about using other peoples routines under license but it gets costly rewriting the interface so we can bung it on a machine controller. Generally we flog MAP software with a machine, but its good to have a simple system the operator can use out on the machine.

Mike