View Full Version : Speed control option for a dc motor that is not part of a CNC, and eBay controller.

14-11-2017, 10:16 PM
Hi Guys

This thread does not relate to a cnc but a conveyor belt on a non-CNC based machine. I am after a device that will allow me to control the speed of a converyor belt, i.e. some speed controler that I can adjust so when I use the turn rang of the not the speed will only go from so slow ot so fast.

Any help much appreciated



16-11-2017, 09:36 AM
You don't mention what size the motor is, this is my goto place for (quality) drives; https://inverterdrive.com/group/DC-Thyristor-Drive/

17-11-2017, 05:24 PM
Hi Eddy,

Cheers very much for the help mate. No I did not put info on the DC motor as I dont know it! I think on my variable speed drive the Potentiometer could be faulty as it turns without stoping or clicking or should I say it just keeps turning round and round. It is only 3 wires and about 4 so I will try that. Tar very much for the link I will keep that in mind.

Tar very much