PDA

View Full Version : Mechanical digitizing touch probe TPA2 by KUROKESU



Kurokesu
04-12-2017, 11:35 AM
Digitizing 5 way mechanical digitizing touch probe TPA2 for Computer Numerical Control (CNC), Coordinate Measuring Machines (CMM) and other machines that require precise coordinate registration.

Short specs:

Stainless steel shank: D=7.0mm, H=20mm
Unit dimensions without stylus: =40mm, H=38.5mm
Adjustable: set screws from 4 sides with included Allen key
Operation principle: breaks contact on touch event
Included cable length: 3m (with attached connector)
Protection class: IP64 (sealed with silicone seals from dust and liquid splashes)
Stylus:
Ruby ball tip D=4mm, Tungsten carbide stem D=2.5mm, Length=31mm (temporary out of stock)
Ruby ball tip D=3mm, Tungsten carbide stem D=1.5mm, Length=30mm
Ruby ball tip D=1mm, Tungsten carbide stem D=0.6mm, Length=20mm (temporary out of stock)
Base material: 6061-T6 black anodized aluminum and stainless steel
Weight: 160g
Actuation force: axial ~5 N, radial 1 N
Tungsten carbide electrical contacts with dielectric anti-oxidation fluid
Repeatability: 2m

NOTE: Visit http://www.kurokesu.com/shop/TPA2 and use "WDKD5" coupon for 5$ discount.

http://kurokesu.com/main/wp-content/uploads/2016/10/IMG_8590_r-768x512.jpg
http://www.kurokesu.com/shop/image/cache/catalog/touchprobe/IMG_9350_r-800x600.jpg
http://www.kurokesu.com/shop/image/cache/catalog/touchprobe/IMG_9351_r-800x600.jpg
http://www.kurokesu.com/shop/image/cache/catalog/touchprobe/IMG_9357_r-800x600.jpg