PDA

View Full Version : NEW MEMBER: Hi from Lincoln



Fabian
08-01-2018, 09:44 AM
Hello All
I'm Fabian from Lincoln in Lincolnshire (UK) and I'm interested in constructing an Axidraw writing clone. I bought some items from Banggood (China), but I'm still looking for suppliers here in the UK.

I have a few questions about wiring and setting up the Arduino as well as how to join two ends of a GT2 Timing Belt so I can get it to the correct size.

I didn't want to start using the forum with a warning about not posting in the right section so I've used this introduction to get an idea of where to ask my questions.

Thanks a lot.

Fabian.:encouragement:

Clive S
08-01-2018, 11:36 AM
Hi Fabian and welcome to the forum. Just post where you feel is the correct place or start a build log to keep all the questions in one place, regarding the timing belt you can buy them any length or ever made to measure.

Fabian
08-01-2018, 08:18 PM
Thanks Clive
Is there a supplier of Timing belts in the UK

Thanks a lot.

Fabian.

EddyCurrent
08-01-2018, 08:57 PM
Thanks Clive
Is there a supplier of Timing belts in the UK

Thanks a lot.

Fabian.

A search engine is your friend.

magicniner
08-01-2018, 09:16 PM
I use City Seals and Bearings in Sheffield but most cities with any local industry will have a bearing and seal supplier, or 3

Clive S
08-01-2018, 10:39 PM
Thanks Clive
Is there a supplier of Timing belts in the UK

Thanks a lot.

Fabian.

As Eddy has pointed out google is your friend. http://www.beltingonline.com/rubber-timing-belts-40/

https://www.accu.co.uk/en/815-htd-type-belts-and-pulleys