Biesse rover help

[Gally]

Hello everyone
We are a joinery based workshop. We purchased a Biesse Rover 15 some years ago. It was working when bought second hand . Not used the machine for the last 18 months . It has now developed fault code and won’t even start.
Requires a Biesse engineer to check it over and run me through the programmes.
In the Oldham Area . It’s a paying job
Regards
Gally

[battwell]

its going to be expensive if the control ram battery has died and lost all parameters. do you have full back up disks for it? control 480 or 481? best guy i can recommend is robin at summit machines- ex biesse engineer.

[Gally]

its going to be expensive if the control ram battery has died and lost all parameters. do you have full back up disks for it? control 480 or 481? best guy i can recommend is robin at summit machines- ex biesse engineer.

Only. One owner. Before me all books discs etc present
Do you have a number I can contact robin on
Regards
Gallly

[battwell]

when was a backup of the machine last made to disk? you will have lost all programs , tool info etc.
robin will be best man to check with
rob tudhope 07834 837715
tell him brendon recommended

[battwell]

ive converted my biesse machines to newer controls- but its a lot of work

[Gally]

Thanks for that. Will ring him tomorrow when I am at the machine and let you know how I get on
Regards
Gally