Desertboy
23-01-2018, 11:15 AM
Hi, if you followed my thread you'd see I just finished my router. The screw has had maybe 2 hour's of use so far. I've ordered a 2010 for the machine as I'm going to upgrade the whole machine to 8*4 with R&P.
In 2 months I'll be selling the 1m screws (1604) with fittings.
So I have the ballscrew and fitting's, coupler and nema 23 (2 nm) for sale but not for 4 weeks (Whilst I wait for the new screw to arrive) I will use this one to get used to the machine do some minor cutting. Mostly I need to learn fusion cam and how that translates to the machine
The Nema is not new but works fine, included because I'm going to upgrade the motor for this axis.
This is the screw I bought
https://www.ebay.co.uk/itm/1-Antibacklash-Ballscrew-Ball-Screws-RM1605-1400mm-C7-BK-BF12-Coupler/262364180528?hash=item3d161fb030:g:OK8AAOSwUoNaPBt 5
After £110 +£10 delivery for screw and motor in the UK, you're welcome to collect (Leicester).
Screw is available the day the new screw comes quoted 3 weeks.
In 2 months I'll be selling the 1m screws (1604) with fittings.
So I have the ballscrew and fitting's, coupler and nema 23 (2 nm) for sale but not for 4 weeks (Whilst I wait for the new screw to arrive) I will use this one to get used to the machine do some minor cutting. Mostly I need to learn fusion cam and how that translates to the machine
The Nema is not new but works fine, included because I'm going to upgrade the motor for this axis.
This is the screw I bought
https://www.ebay.co.uk/itm/1-Antibacklash-Ballscrew-Ball-Screws-RM1605-1400mm-C7-BK-BF12-Coupler/262364180528?hash=item3d161fb030:g:OK8AAOSwUoNaPBt 5
After £110 +£10 delivery for screw and motor in the UK, you're welcome to collect (Leicester).
Screw is available the day the new screw comes quoted 3 weeks.