PDA

View Full Version : CNC router enclosure



Leadhead
26-01-2018, 09:32 AM
I am looking for suggestions, after covering my workshop in fine lime wood dust. Despite having a vacuum cutter hood on the router. Do not really want to put a permanent hard enclosure over it, but thinking somewhere along the lines of a white nylon fabric tent enclosure, possibly with a plexiglass front window of some description.
If you have been here, I would be grateful for any advice.

magicniner
27-01-2018, 02:32 PM
Curtains are regularly used in industry for dust control and to ensure extraction has the best efficiency where used.