Syil X4+ LCD panel

[Clockworld]

Not many posts here but here goes!

I'm after the LCD panel for an X4 +

I have taken the front panel off and the LCD panel has part number: YXD-19264H15B

I don't see mto be getting anywhere with Syil direct, so thought I would try here.

Any thoughts?

Matt

[m_c]

A quick search for that part number gives us this page with the key details - http://a1lcdtechnology.com/category/monochrome-lcd-module/
Datasheet with a bit more specifics can be found at http://www.yexinda.com/pdf02/YXD-19264H15B%20LCM.pdf

And a quick google for 192x64 lcd display, with a KS0108 compatible controller throws up this - https://www.buydisplay.com/default/3-3-inch-graphic-lcd-192x64-arduino-module-display-black-on-yg

Unfortunately China is on holiday, so you're probably not going to get any response until next month...

[Clockworld]

Thanks M_C

I had already seen the first 2 and have yet to receive a response from a1cdtechnology.
The fact that China is on holiday maybe a factor (stated on the 'buydisplay' site as from 8/2/18 to 25/2/18)

The 'buydisplay' link looks similar (only need to solder the pins for the cable) so this is probably worth a punt for for that price!

Thanks again, Matt

[Clockworld]

I have ordered one from BuyDisplay and will feedback once I have it!

[Clockworld]

I ordered one of these:
https://www.buydisplay.com/default/3-3-inch-graphic-lcd-192x64-arduino-module-display-black-on-yg
I needed to solder an edge pin connector to it (which was quite an easy job) and it works a treat.
Matt