PDA

View Full Version : RFQ: I need a small crest cnc'd in brass, 3 cm in height from 3dm file



Alexreed86
16-03-2018, 02:30 PM
I am a small jeweller and I have a model which i have had milled in wax and cast.
I am curious to see if cinching directly into the metal would give a more defined piece especially on the lettering and small detail.
I have attached a few photos if anyone can help please get in touch.
The crest is 3 cm in height.
And designed in rhino saved as a 3dm file.

Regards

Alex reed