John Chandler
26-03-2018, 01:21 PM
Hi all, I'm new to the CNC world so please be gentle.
Well, that's not actually true as I owned a Marchant Dice 4 axis machine a few years ago but only got as far as putting a pen in the chuck and writing help before selling it.
I run a PCB assembly company (Anode Electronics Ltd) and for years we've subbed our ABS box cutting out to a local company. We now have sight of a pretty large contract that would justify buying a machine and doing them in house.
I will put a thread in the section about machines but I'll be looking for advice on which machine etc.
Any help would be appreciated.
cheers.
John.
Well, that's not actually true as I owned a Marchant Dice 4 axis machine a few years ago but only got as far as putting a pen in the chuck and writing help before selling it.
I run a PCB assembly company (Anode Electronics Ltd) and for years we've subbed our ABS box cutting out to a local company. We now have sight of a pretty large contract that would justify buying a machine and doing them in house.
I will put a thread in the section about machines but I'll be looking for advice on which machine etc.
Any help would be appreciated.
cheers.
John.