PDA

View Full Version : Now THIS is what I call a lathe !



AndrewMawson
28-06-2018, 10:27 PM
Just a little something I acquired three weeks ago. Beaver TC-20 CNC lathe with Sinumerik 820T controller. Only 6.25 tons !

It sat idle for ten years due to the death of it's owner, and one of the lithium back up batteries burst spilling corrosive fluid all over the place.

I've now got the control back up running but am yet to re-unite it with the lathe


Full story so far is here:

https://madmodder.net/index.php/topic,12592.0.html

Chaz
29-06-2018, 11:28 AM
Wow, that looks awesome. Will need to pop around and come take a look.

AndrewMawson
29-06-2018, 02:40 PM
And you'll be very welcome Chaz :)

routercnc
30-06-2018, 10:20 AM
Wow nice work. Is this for fun or have you got a business?

I had to justify and work on the reasons I needed a lathe for about a year before getting the green light on my little Warco!

AndrewMawson
30-06-2018, 10:30 AM
No, I'm retired and playing in my dotage. Here are two other CNC lathes I've brought back from the dead in the last couple of years:

Denford MIRAC (just a baby) https://madmodder.net/index.php/topic,12452.0.html

Traub TNG350G (a monster) https://madmodder.net/index.php/topic,8261.0.html


I enjoy the challenges these machines present, and it keeps my grey cells working, but if you take time into consideration no way is it ecconomic even if i charged minimum wage !

Nickhofen
30-06-2018, 08:32 PM
Monster!!!
Happy new tool day!