PDA

View Full Version : wiring V1000 VFD from a 2.2kw Chinese invertor



dek667
10-08-2018, 09:09 AM
I am changing the Chinese VFD to a Yaskawa v1000. On the Chinese one there are 2 cables connected into the DMC and FOR terminals. Does anyone know were these should go on the V1000. Any info would be much appreciated.

john swift
10-08-2018, 10:03 AM
looking at page 10 of the quick start guide

24646

move one wire from the Chinese VFD
DMC and connect it to SC on the V1000

and the second wire from
FOR and connect it to S1 on the V1000

John