PDA

View Full Version : Lost me 4 pin power connector for spindle



Desertboy
20-09-2018, 12:06 PM
I had to move my machine which was epic, including removing most of the wiring. During the move I lost part of the power connector for the spindle so I couldn't lock the wiring into the spindle to ensure no movement.

After much searching I believe I have sourced the correct replacement

GX20 4 pin female

The cheap direct from China source
https://www.aliexpress.com/item/1set-GX20-2-3-4-5-6-7-8-Pin-Male-Female-20mm-L94-100Y-Circular/32866988935.html?spm=2114.search0104.3.23.31877920 uBZGHP&ws_ab_test=searchweb0_0,searchweb201602_1_10065_10 068_10130_10547_10059_10884_10548_10887_10696_1000 31_10192_10190_10084_10083_10103_10618_10307_10820 _10301_10821_10303,searchweb201603_2,ppcSwitch_3&algo_expid=c767d9a5-51f8-4abb-9ca6-319963aa6004-3&algo_pvid=c767d9a5-51f8-4abb-9ca6-319963aa6004&priceBeautifyAB=0

UK source
https://www.ebay.co.uk/itm/GX20-Aviation-Plug-Socket-Circular-Multipole-Connector-Panel-Mount-2-to-5-Pin/152632997823?ssPageName=STRK%3AMEBIDX%3AIT&var=452124713058&_trksid=p2057872.m2749.l2649

EU source
http://cnc-plus.de/en/CNC-Electronics/Connectors/4-Pin-Cable-Female-Connector--Stepper-Motor-Connector-3A---40V-.html

Hopefully someone else will find this information useful

routercnc
22-09-2018, 12:18 PM
I thought they were GX16 which are a bit smaller in diameter. Just check they will fit through the hole in the end cap.

Desertboy
22-09-2018, 01:02 PM
I thought they were GX16 which are a bit smaller in diameter. Just check they will fit through the hole in the end cap.

We shall see on Monday I guess.

Desertboy
04-10-2018, 04:04 PM
I thought they were GX16 which are a bit smaller in diameter. Just check they will fit through the hole in the end cap.

I've sorted it out now and the fitting is a GX20, I'll use the GX16 for my limit switches.