View Full Version : NEW MEMBER: Introducing Myself

29-09-2009, 11:00 AM
Hi everyone

I joined the forum because I have decided to build a cnc router. After having surfed the web looking for information I found this site to be one of the most useful.

I am an IT manager by day and in my spare time I enjoy lots of hobbies including electronics, photography, computing and making stuff. I have an engineering background (Machine Tool Maintenance). I enjoy fabricating things out of steel and am a reasonably compitant welder.

Apart from the usual tools I have a MIG and a stick welder. I did have an Oxy-Acetaline set but have recently returned to bottles to BOC as I very rarely used them and could find a better use for the 120 pond a year rental. , a Floor standing drill press. I hope to get hold of a small lathe in the near future.

Regards to All

29-09-2009, 12:07 PM
Hi Geoff

Welcome to the forum :beer:

29-09-2009, 08:06 PM
Hi Geoff,

Welcome to the forum! Have you decided on a design yet? Don't forget to get a build log going (with photos) once you start building :smile:


Lee Roberts
30-09-2009, 01:53 AM
Hiya, :wave: