CCSMIO/IP-M power supply question

[chillybo]

Hello folks,
I am about to order a 24 volt DIN mountable PSU for my IP/M controller. Could I ask what sort of output current do I need from the PSU?
Regards Chris

[Clive S]

Hello folks,
I am about to order a 24 volt DIN mountable PSU for my IP/M controller. Could I ask what sort of output current do I need from the PSU?
Regards Chris

According to the manual it says power consumption is 5W so about 0.2A I would use a 5A PS in case you want to power other things in the control box

[Chaz]

I used a 5A unit on all my builds without issue.

[chillybo]

Thanks Clive, good idea about having a bit of spare power for when it may be needed.