Hi everyone

[Gary1329]

Hi everyone
Im a complete beginner to CNC laser and routing..
My name is Gary im from Scunthorpe UK.
im 61 ive been looking at getting into CNC for a while now and just taken the plunge.
Thank you very much for adding me to the group

[Kitwn]

Welcome Gary,
Does this mean you are a member of the elite 1958 Club?

Kit

[AndyGuid]

... My name is Gary im from Scunthorpe UK. ...
.
Welcome to the forum Gary. Just a heads up that your intro says you're from Scunthorpe UK, but you're flying the Stars and Stripes as you must have selected USA somewhere.

[Gary1329]

Thanks Andy and Kit. I’m looking forward to producing some nice wooden bits. I have one of the Chinese laser and routers. I’ve mastered the laser part of it just struggling with the router part. I’ve got my project to the machine but when I try to cut it out it just moves right down to the bottom left and just keeps running.
What machines do you have ?

[Lee Roberts]

Just a heads up that your intro says you're from Scunthorpe UK, but you're flying the Stars and Stripes as you must have selected USA somewhere.

Fixed :triumphant:

[ericks]

Welcome Gary....i am also new here but not new to cnc:)

[Gary1329]

Hi Ericka
What machine do you have and how are you getting on with it?

[Gary1329]

Hi Andy
I noticed that but can’t find how to change it.
Gary

[ericks]

Hi Ericka
What machine do you have and how are you getting on with it?

I used to have a 6040 with parallel port control. Recently i completed a build of a bigger machine. I am using UC300eth and uccnc. The machine works extremely well...i use it on aluminium no problem and also to cut steel plate when i make control panels:)

[Gary1329]

Hi Ericka
I have a 30x18 cm I’ve just ordered some limit switches. I didn’t realise I needed them . Every time I go to cut it shoots down to bottom left hand corner. I think it’s looking for the limits.
Gary

[ericks]

Hi Ericka
I have a 30x18 cm I’ve just ordered some limit switches. I didn’t realise I needed them . Every time I go to cut it shoots down to bottom left hand corner. I think it’s looking for the limits.
Gary

Interesting....30x18 cm?? What make machine is it

[Gary1329]

It’s one of the Chinese ones off eBay. It has the Grbl controller on it . It seems to be ok for what I need it for at the moment . I’m planning on cutting little wooden shapes for crafting.
Gary

[ericks]

It’s one of the Chinese ones off eBay. It has the Grbl controller on it . It seems to be ok for what I need it for at the moment . I’m planning on cutting little wooden shapes for crafting.
Gary

I am sure someone here can help you with the Grbl controller....i have never worked on them.

Enjoy your cnc, they are great fun:)

[Kitwn]

Gary,
I have a machine I designed and built myself using steel box section lengths I scrounged of the local tip and all the clever bits bought on Ebay and AliExpress. I'm using LinuxCNC running on an old Windows XP era PC so cannot advise you regarding Grbl, though if you haven't specifically, and sucessfully homed the machine by some means before starting to try and cut anything this may well be the problem.
Getting a machine up and running can be frustrating at first, there are so many things you didn't know you didn't know, but once it's sorted you'll have a lot of fun finding new things to make with it.

Kit

[AndyGuid]

I have one of the Chinese laser and routers. I’ve mastered the laser part of it just struggling with the router part. I’ve got my project to the machine but when I try to cut it out it just moves right down to the bottom left and just keeps running.
What machines do you have ?

Afraid I won't be able to help you Gary, as my CNC still only exists in my imagination. But think if you post a separate thread describing the issues you're experiencing, someone will be along to help. . . . . .

[Gary1329]

Hi Kit
Yes I can see me doing a build in the future now I know how easy it is to do. The one I have I had to build but it was in Kit form. Thanks for the advise I will post on the Grbl posts.
Gary