Powder Coating

[Washout]

Hi Guys,

I have a number of projects in sheet aluminium (6082) that will need powder coating.

Has anyone got recommendations for a kit?

I've seen two currently:

https://smile.amazon.co.uk/dp/B07H2YM1NC/ref=cm_sw_em_r_mt_dp_U_ZrG9EbSAT8Z8N

This one seems to be everywhere and is an obviously bulk produced OEM variant that gets rebadged.

and this one, which looks like it doesn't need a high voltage setup?:

https://www.electrostaticmagic.co.uk/

All input welcome.

[JAZZCNC]

I've got the second one and it works great. Really easy to use and simple to clean. The only important requirement is that your air must be dry, but that's true of all powder coaters.

[Doddy]

I have the first, and it works great. Really easy to use and clean. The only two important requirements is that your air must be dry, but that's true of all powder coaters. Oh, and to attach the croc-clip. And to press the foot switch.

[JOGARA]

I have the second and it is pretty good.
Not sure how it compares to a powered ones though.
I find there is a lot of waste with it.

Also found that it can block internally too.

[JAZZCNC]

I have the second and it is pretty good.
Not sure how it compares to a powered ones though.
I find there is a lot of waste with it.

Also found that it can block internally too.

The blocking is due to damp air, I had the same issue until I put a better drier/filter on the air supply. After that I never had any more issues.

[cropwell]

My issue would be the oven, for two reasons, 1. it is a fan oven and 2. Her Indoors. I bought a mini oven for heating sheets for vac forming, but she saw it and I lost the oven:mad:

[Washout]

Thanks guys - useful info as ever.

Next trick once I get a kit and get it working, is to see if I can silk screen print or use another method of putting text and vector graphics on the powder coated surface.

[cropwell]

Thanks guys - useful info as ever.

Next trick once I get a kit and get it working, is to see if I can silk screen print or use another method of putting text and vector graphics on the powder coated surface.

https://www.powdercoatingforum.net/forum/powder-coating/2771-raised-letters

This looks interesting:-

https://www.frost.co.uk/eastwood-extreme-chrome-bonded-hotcoat-powder-coating-8-oz/?gclid=Cj0KCQjwoub3BRC6ARIsABGhnyYl50IxQAJ6Vbg_gh1 h6FMIau6laCI9XP6_-sEGcLRgYJlZ9GXJ57QaAtjfEALw_wcB

Seems like I need a powder coating kit in my toybox.

[adamfromscotland]

https://www.ebay.co.uk/itm/114180401262