PDA

View Full Version : Cross slide radius or diameter measurement with cnc


Colin Barron
10-01-2022, 04:57 AM
With cnc on a cross slide is the digital readout set up to measure the actual diameter of the part, or the size of cut, (ie the movement is half the digital readout)?
https://www.youtube.com/watch?v=o5AXKYctOMs
Clive S
10-01-2022, 08:40 AM
With cnc on a cross slide is the digital readout set up to measure the actual diameter of the part, or the size of cut, (ie the movement is half the digital readout)?
https://www.youtube.com/watch?v=o5AXKYctOMs


It can be set to either. It can be set in the DRO with a button or software to read radius or Dia..
Colin Barron
10-01-2022, 11:34 AM
Hi Clive thanks for the reply,
In the case of my SZGH CNC1000TDb it uses: set P16 on User parameters,diameter or radius programming.
The stepper pulses need to be matched at 10,000 on the stepper drive and in Axis Parameter No.17 Numerator of X Electron gear also set to 10,000.
I will set the No18 moved distance in diameter (P16) and see if that is correct.

Regards
Colin